EutecTrodes® for Joining & Crack Repair
EutecTrodes® for Joining & Crack Repair
Castolin Eutectic
Image
Primary use
Image
Secondary use
| Product name | Base Metal Use | Description | ||||||
|---|---|---|---|---|---|---|---|---|
| Abrasion | Impact | Erosion | Corrosion | Heat | Cavitation | Metal to Metal Friction | ||
| EutecTrode® 27 |  |
Non-machinable electrode for contaminated & porous cast iron. Use as a buttering layer before using other electrodes | ||||||
| EutecTrode® 244 |  |
|
For welding contaminated oil-soaked castings & for joining cast iron to steel. Excellent machinability | |||||
| EutecTrode® 3055/4055 | |
|
Specification NiFe electrode for strength joining of engineering-grade castings | |||||
| EutecTrode® 3099/4099 | |
|
Specification high nickel alloy for joining and overlaying casting weld deposits are readily machinable | |||||
| Xuper® 2233N | |
|
Superior crack resistance welding of gray, ductile & SG castings where high strength is required…excellent machinability | |||||
| Xuper® 2240 | |
For welding ductile & nodular iron castings where machinability is important | ||||||
| EutecTrode® 66N | |
A special LH electrode for welding free-machining steels…no porosity | ||||||
| EutecTrode® 777 | |
High speed electrode with self-releasing slag with little if any spatter | ||||||
| EutecTrode® 966 | |
A M&R maintenance electrode when LH properties are needed | ||||||
| EutecTrode® 7018RS | |
High performance LH electrode with rapid start action and minimum spatter | ||||||
| EutecTrode 9018QS | |
For welding structural steel when impact properties are called for…E7018-1 class. | ||||||
| Super 110 | |
Super high strength electrode for welding steels under restraint…UTS of 110,000 psi | ||||||
| Xuper® 66 XHD® | |
Crack-resistant electrode with high welder appeal & low moisture pick-up | ||||||
| BeautyWeld® II | |
All-position welding at low amps. Self-releasing slag with negligible spatter | ||||||
| SteelTectic® N | |
High arc-strength electrode for welding rusty and dirty steels | ||||||
| EutecTrode 670E | |
|
|
Use for welding steels when the composition is not known. Heat & corrosion resistant weld deposit | ||||
| Xuper 680 CGS | |
|
|
Superior weldability over a wide range of steels…self releasing slag | ||||
| EutecTrode 680 | |
|
|
Ultimate crack resistance when welding dissimilar steels & alloy steels | ||||
| EutecTrode 3026N/4026N | |
|
|
Superior high-strength alloys for most dissimilar steel applications | ||||
| Xuper 6868 XHD | |
|
|
Ultra-fast high deposition electrode for joining and for cushion layers | ||||
| Xuper 646 XHD | |
|
Best for cushioning and for joining manganese steel castings | |||||
| NucleoTec® N | |
|
|
|
For deep re-fill applications involving cryogenic and/or high temperatures | |||
| Xuper 2222 XHD | |
|
|
|
Use for critically stressed components subject to high temperatures | |||
| EutecTrode 6800 | |
|
|
For corrosion & oxidation resistance, and thermal shock applications | ||||
| EutecTrode 1851 | |
|
|
Use on aluminum bronze alloys and for joining to carbon steels | ||||
| Xuper 1851 XHD | |
|
|
High deposition version with similar properties to EutecTrode 1851 | ||||
| Xuper 2800 XHD | |
|
|
A tin-bronze alloy for steels to cast irons and for metal-to-metal wear. | ||||
| Eutectrode 3021/4021 | |
Welding cast & wrought Al-alloys which contain silicon and/or manganese | ||||||
| Eutectrode 2101 | |
For use on a wide range of aluminum casting alloys..good re-build properties | ||||||
| Xuper 2109 | |
Welding cast & wrought Al-alloys which contain magnesium & silicon | ||||||
| StainTrode® A | |
|
|
All-position electrode for quality welding of grades 321, 347, 304, & 302 stainless steels | ||||
| StainTrode AMoL | |
|
|
For elevated temperature creep resistance and for cryogenic applications…use on Grades 316L & 316. | ||||
| StainTrode BMoL | |
|
|
For severe corrosion applications and for critical joining of Grade 317L & 317 | ||||
| StainTrode D | |
|
|
Use when welding stainless steels of unknown composition & Grade 310 | ||||
| EutecTrode 308L-16 | |
|
|
For welding base metals of similar composition such as AISI 301, 302, 304, 304L 308, 308L… | ||||
| EutecTrode 308L-17 | |
|
|
Use for similar application to 308L but with a “17” usability classification… | ||||
| EutecTrode 308LVD-17 | |
|
|
Similar to application to 308L but with “vertical down” welding properties | ||||
| EutecTrode 309L-16 | |
|
|
Use for joining AISI 309 & 309L grades and for joining stainless steels to carbon steels… | ||||
| EutecTrode 310-16 | |
|
|
Use when welding heat resistant AISI 310 grade and for “upgrading” or surfacing low alloy steels… | ||||
| EutecTrode 310-17 | |
|
|
Similar application areas to 310-16 but with a “17” usability classification… | ||||
| EutecTrode 316L-16 | |
|
|
Use to weld base metals of similar composition such as AISI 316 & 316L…also grades 316Ti, 329, 410, 430… | ||||
| EutecTrode 316L-17 | |
|
|
Similar application areas to 316L-16 but with a “17” usability classification… | ||||
| EutecTrode 316LVD-17 | |
|
|
Similar to application to 316l-16 but with “vertical down” welding properties | ||||
| ChamferTrode® | |
|
|
|
For chamfering and grooving all metals prior to welding | |||
| CutTrode® | |
|
|
|
For cutting & piercing all metals…rusted bolts, rivets, etc… | |||
| ExoTrode® AC/DC | |
|
|
|
For both chamfering and cutting operations using either AC or DC | |||
| CaviTec® SMA | |
|
|
As-deposited: 280 HV50 Work hardened: 450 HV50 | ||||
| Ultimium® N112 | |
|
As-deposited: 65 HRC | |||||
| EutecTrode® 2B | |
|
As-deposited: 30 HRC | |||||
| CastoStar® 1XHD® | |
|
|
As-deposited: 38 HRC Work hardened: 45 HRC | ||||
| EutecTrode 40 | |
|
|
As-deposited: 90 HRB Work hardened: 45HRC | ||||
| EutecTrode N102 XHD | |
|
As-deposited: 50 HRC (3-passes) | |||||
| Xuper® 646 | |
|
As-deposited: 90 HRB Work hardened: 30 HRC | |||||
| Ultimium® N112 | |
|
As-deposited:65 HRC | |||||
| EutecTrode 700E | |
As-deposited: 60 HRC | ||||||
| EutecTrode 4002 | |
|
|
As-deposited: 30 HRC | ||||
| EutecTrode 4004N | |
As-deposited: 55 HRC | ||||||
| EutecTrode 5003 | |
As-deposited: 55 HRC | ||||||
| EutecTrode 5005 | |
|
As-deposited: 60 HRC | |||||
| ChromCarb® N6006 | |
|
|
As-deposited: 60 HRC | ||||
| AbraTec® 6710 | |
|
As-deposited: 65 HRC | |||||
| AbraTec 6715 | |
|
|
As-deposited: 65 HRC | ||||
| EutecTrode 6804 XHD | |
|
|
As-deposited: 50 HRC Work hardened: 55 HRC | ||||
| EutecTrode 6899 | |
|
|
|
|
As-deposited: 25 HRC Work hardened: 40 HRC | ||
| EutecTrode 7020 | |
|
As-deposited: 60 HRC | |||||
| EutecTrode 7030 | |
|
As-deposited: 60 HRC | |||||
| EutecTrode 7040 | |
|
|
As-deposited: 65 HRC | ||||
| EutecDur® 9060 | |
|
|
|
As-deposited: 40 HRC | |||
| EutecDur 9080 | |
|
As-deposited: 30 HRC Work hardened: 45 HRC | |||||
| ToolTectic® 6NHSS | |
|
|
As-deposited: 60 HRC | ||||
| ToolTectic 6NHW | |
|
As-deposited: 50 HRC | |||||
| ToolTectic 6SH | |
|
As-deposited: 55 HRC | |||||
| Xuper 2800 XHD | |
|
As-deposited: 80 HRB Work hardened: 95 HRB | |||||