EuTroLoy PTA

EuTroLoy 16319 is a self-fluxing Ni-based powder for welding on bronze. Coatings from EuTroLoy 16319 provide low metal friction combined with a good resistance to wear from adhesion and corrosion. They are suitable for machining.

EuTroLoy 16012 is used for protection against wear, abrasion and corrosion. Its superb wear and galling resistance is based on well dispersed carbide phases in a CoCr alloy matrix. A high tungsten content promotes excellently elevated temperature property retention, with hardness retained up to 700 °C. The high fraction of hard, brittle carbides provides increased resistance to abrasion and severe sliding wear together with a reasonable resistance to impact loads and cavitation erosion. 

EuTroLoy PG 6503 is a mix of 40% chrome free NiBSi powder with 60% tungsten carbides. The embedded carbides considerably improve resistance to wear by abrasion and erosion. Coatings from EuTroLoy PG 6503 provide good protection against corrosion from a wide range of aggressive media. Due to the high carbide content deposits may show cracks.  

EuTroLoy 16625 is a Ni-based Superalloy. The high contents of Cr and Mo in combination with very low C provide an outstanding protection against many corrosive media. Coatings from EuTroLoy 16625 have a high ductility and an excellent resistance to pitting and crevice corrosion.  

EuTroLoy 16316 is an austenitic steel with an improved corrosion resistance compared to other CrNi steels like AISI 304. Coatings from EuTroLoy 16316 provide a high toughness and an excellent protection against pitting and intercrystalline corrosion. They are resistant in chorine containing environments and at temperatures up to 400°C, scale resistance goes even up to 800°C. 

EuTroLoy 16496 is a self-fluxing Ni-based powder with an excellent resistance to creep, corrosion and scaling at temperatures up to 700 °C. Coatings from EuTroLoy 16496 have a low coefficient of sliding metal friction and a high adhesive strength.