Name: Castolin Eutectic Gmbh
Telephone: +49 6192 4030

Recommended products

Product description	Properties	Applications	Get a quote
Image Eutalloy 10911 Eutalloy® 10911 is a mix of 40% nickel based self-fluxing powder with 60% tungsten carbides. Coatings from Eutalloy® 10911 provide excellent edge build-up capabilities combined with very good abrasion and corrosion resistance. They are used to protect steel, cast iron and nickel alloys against abrasive and erosive wear. Due to the carbide content deposits may show cracks.	Apparent density: ~ 6.0 g/cm3 Melting range: ~ 970 – 1150°C, Matrix only Hardness: typ. 58 HRC hardness depends on spray parameters and may vary	Coating of conveyor screws Coating of decanter blades Protection of fan blades Hardfacing of extrusion presses	Get a quote
Image BoroTec 10009 Nickel-base Hardfacing Alloy	BoroTec® 10009 is a water atomized NiCrBSi alloy with high hardness and low metal friction. In addition to good resistance to varies wear types like rolling and sliding wear it provides excellent protection against corrosion, oxidation and scaling.	Coating of casting rolls and hydraulic cylinders Protection of thrust bearings Repair of glass molds & glass plungers Coating of conveyor screws	Get a quote
Image NiTec 10224 NiTec 10224 is a water atomized NiCrBSi alloy with low hardness, which makes the powder ideal for protective coatings on a variety of base materials like steels, cast iron and nickel. Often used for repair of historical parts made from cast iron. Deposits from NiTec 10224 are easy to machine and have a low coefficient of friction. They provide an excellent resistance to corrosion at temperatures up to 700°C.	Apparent density: ~ 4.8 g/cm3 Melting range: ~ 1035 – 1260°C Hardness: typ. 250 HV hardness depends on spray parameters and may vary	Rebuilding of worn areas Coating of glass moulds Repair of defective cast iron Protection of boiler tubes in incineration plants	Get a quote
Image CobalTec 10092 Cobalt-base Self-fluxing Hardfacing Alloy	CobalTec® 10092 combines advanced properties of Co and Ni hardfacing alloys. Coatings from CobalTec® 10092 are resistant to sliding wear in combination with corrosion attack of weak organic acids and bases.	Coating of press stamps to manufacture ceramic parts Build-up of tool parts of extruders in plastic industry Repair of forming and drawing tools Protection of parts against medium impact wear	Get a quote
Image Eutalloy PE 8422 Nickel-base Hardfacing Alloy	Eutalloy® PE 8422 belongs to the LT powder series (low temperature), this powder series is designed to repair moulds made of cast iron or bronze. Based on the chemical composition the melting point is about 200°C lower than other NiCrBSi alloys.	Build-up of mould seams Repair of neck rings Coating of castings Restoration of historical cast iron	Get a quote
Image Eutalloy PE 8431 Eutalloy® PE 8431 belongs to the LT powder series (low temperature). This powder series is designed to repair moulds made of cast iron or bronze. Based on the chemical composition the melting point is about 200°C lower than other NiCrBSi alloys. Coatings from Eutalloy® PE 8431 have an excellent thermal shock resistance and a very high bond strength. They are easy to machine. Due to the reduced melting point the powder is also ideal to restore ancient cast iron of buildings and constructions.	Apparent density: ~ 4.7 g/cm3 Melting range: ~ 860 – 1340°C Hardness: typ. 31 HRC hardness depends on spray parameters and may vary	Build-up of mould seams Repair of neck rings and blow heads Coating of castings Restoration of historical cast iron	Get a quote

Product description	Image Eutalloy 10911 Eutalloy® 10911 is a mix of 40% nickel based self-fluxing powder with 60% tungsten carbides. Coatings from Eutalloy® 10911 provide excellent edge build-up capabilities combined with very good abrasion and corrosion resistance. They are used to protect steel, cast iron and nickel alloys against abrasive and erosive wear. Due to the carbide content deposits may show cracks.	Properties	Apparent density: ~ 6.0 g/cm3 Melting range: ~ 970 – 1150°C, Matrix only Hardness: typ. 58 HRC hardness depends on spray parameters and may vary	Applications	Coating of conveyor screws Coating of decanter blades Protection of fan blades Hardfacing of extrusion presses	Get a quote
Product description	Image BoroTec 10009 Nickel-base Hardfacing Alloy	Properties	BoroTec® 10009 is a water atomized NiCrBSi alloy with high hardness and low metal friction. In addition to good resistance to varies wear types like rolling and sliding wear it provides excellent protection against corrosion, oxidation and scaling.	Applications	Coating of casting rolls and hydraulic cylinders Protection of thrust bearings Repair of glass molds & glass plungers Coating of conveyor screws	Get a quote
Product description	Image NiTec 10224 NiTec 10224 is a water atomized NiCrBSi alloy with low hardness, which makes the powder ideal for protective coatings on a variety of base materials like steels, cast iron and nickel. Often used for repair of historical parts made from cast iron. Deposits from NiTec 10224 are easy to machine and have a low coefficient of friction. They provide an excellent resistance to corrosion at temperatures up to 700°C.	Properties	Apparent density: ~ 4.8 g/cm3 Melting range: ~ 1035 – 1260°C Hardness: typ. 250 HV hardness depends on spray parameters and may vary	Applications	Rebuilding of worn areas Coating of glass moulds Repair of defective cast iron Protection of boiler tubes in incineration plants	Get a quote
Product description	Image CobalTec 10092 Cobalt-base Self-fluxing Hardfacing Alloy	Properties	CobalTec® 10092 combines advanced properties of Co and Ni hardfacing alloys. Coatings from CobalTec® 10092 are resistant to sliding wear in combination with corrosion attack of weak organic acids and bases.	Applications	Coating of press stamps to manufacture ceramic parts Build-up of tool parts of extruders in plastic industry Repair of forming and drawing tools Protection of parts against medium impact wear	Get a quote
Product description	Image Eutalloy PE 8422 Nickel-base Hardfacing Alloy	Properties	Eutalloy® PE 8422 belongs to the LT powder series (low temperature), this powder series is designed to repair moulds made of cast iron or bronze. Based on the chemical composition the melting point is about 200°C lower than other NiCrBSi alloys.	Applications	Build-up of mould seams Repair of neck rings Coating of castings Restoration of historical cast iron	Get a quote
Product description	Image Eutalloy PE 8431 Eutalloy® PE 8431 belongs to the LT powder series (low temperature). This powder series is designed to repair moulds made of cast iron or bronze. Based on the chemical composition the melting point is about 200°C lower than other NiCrBSi alloys. Coatings from Eutalloy® PE 8431 have an excellent thermal shock resistance and a very high bond strength. They are easy to machine. Due to the reduced melting point the powder is also ideal to restore ancient cast iron of buildings and constructions.	Properties	Apparent density: ~ 4.7 g/cm3 Melting range: ~ 860 – 1340°C Hardness: typ. 31 HRC hardness depends on spray parameters and may vary	Applications	Build-up of mould seams Repair of neck rings and blow heads Coating of castings Restoration of historical cast iron	Get a quote

Subscribe to Eutalloy 1 step

Find your technical expert

Get in touch

Product Type

Coating

Welding

Brazing

Wear Parts

Cutting

Product name

Recommended products

Castolin Eutectic

Contact us