Name: Castolin Eutectic Gmbh
Telephone: +49 6192 4030

Recommended products

Product description	Properties	Applications	Get a quote
Image Rototec 19310 RotoTec 19310 is a ferritic stainless steel powder with a low ductility and an excellent resistance to atmospheric corrosion and rust. Coatings from RotoTec 19310 provide a good protection against frictional wear. They are machinable with normal tools and suitable for turning.	Apparent density: ~ 3.0 g/cm3 Melting range: - Hardness: typ. 335 HV hardness depends on spray parameters and may vary	Protection of workpieces against frictional wear Rebuild of parts Coating of wear sleeves for pumps	Get a quote
Image HardTec 19400 Stainless Steel Alloy	RotoTec 19400 is a water atomized high chromium alloy with a typical ferritic/martensitic structure. Coatings from RotoTec 19400 provide a good resistance to atmospheric and high temperature corrosion.	Coating of pistons, bell housings and motor casings Protection of wear parts for pumps Coating of wear rings Repair of cylinder shafts	Get a quote
Image Rototec 19850 RotoTec 19850 is a Cu-based powder for overlays with very good sliding properties and resistance to friction and impact loads. Coatings from RotoTec 19850 provide excellent protection against seawater and chlorine containing enviroments. They have a very good machinability by turning.	Apparent density: ~ 4.1 g/cm3 Melting range: ~ 1000-1100°C Hardness: typ. 120 HV hardness depends on spray parameters and may vary	Repair of ship screws Coating of metal parts from chemical engineering Protection of shafts, pistons and bearing seats Rebuilding of worn parts Coating of valve seats	Get a quote
Image LubroTec 19985 LubroTec 19985 is a water atomized NiCrFe alloy with low hardness, which makes the powder ideal for protective coating on a variety of base materials like steels, cast iron and nickel. Coatings from LubroTec 19985 provide high toughness and excellent resistance to adhesion and metal friction. They have a very good machinability by turning. The cold sprayed coatings may be inhomogenious and may have micro pores.	Apparent density: ~ 3.0 g/cm3 Melting range: ~ 1430-1450°C Hardness: typ. 200 HV hardness depends on spray parameters and may vary	Protection of wear parts against metal friction Repair of bearing seats and pistons Rebuilding worn parts	Get a quote
Image Proxon 21021 Proxon 21021 is a water atomized NiMoAl alloy with low hardness, which makes the powder ideal for protective coating on a variety of base materials like steels, cast iron and nickel. Coatings from Proxon 21021 provide an excellent resistance to adhesion, erosion and to metal friction. They are easy to machine. Based on the toughness Proxon 21021 is very much suitable as bond coat for ceramic coatings.	Apparent density: ~ 2.8 g/cm3 Melting range: ~ 1445 – 1460°C Hardness: typ. 170 HV hardness depends on spray parameters and may vary	Bond coat for ceramic and carbide coatings Protection of mechanical seats Thin and thick anti-wear coatings Coating of sliding surfaces	Get a quote
Image Proxon 21031 Proxon 21031 is a self-bonding NiCrAl alloy with a good resistance to corrosion from waste water. Coatings from Proxon 21031 have a very low coefficient of friction and provide thick deposit capability (<3mm). They are easy to machine. The deposits do not require any bond coat.	Apparent density: ~ 2.3 g/cm3 Melting range: ~ 1250 – 1400°C Hardness: typ. 280 HV hardness depends on spray parameters and may vary	Coating of parts in pulp & paper industry Protection of fan blades, shaft sleeves and roller bearing seats Coating of compressor pistons	Get a quote

Product description	Image Rototec 19310 RotoTec 19310 is a ferritic stainless steel powder with a low ductility and an excellent resistance to atmospheric corrosion and rust. Coatings from RotoTec 19310 provide a good protection against frictional wear. They are machinable with normal tools and suitable for turning.	Properties	Apparent density: ~ 3.0 g/cm3 Melting range: - Hardness: typ. 335 HV hardness depends on spray parameters and may vary	Applications	Protection of workpieces against frictional wear Rebuild of parts Coating of wear sleeves for pumps	Get a quote
Product description	Image HardTec 19400 Stainless Steel Alloy	Properties	RotoTec 19400 is a water atomized high chromium alloy with a typical ferritic/martensitic structure. Coatings from RotoTec 19400 provide a good resistance to atmospheric and high temperature corrosion.	Applications	Coating of pistons, bell housings and motor casings Protection of wear parts for pumps Coating of wear rings Repair of cylinder shafts	Get a quote
Product description	Image Rototec 19850 RotoTec 19850 is a Cu-based powder for overlays with very good sliding properties and resistance to friction and impact loads. Coatings from RotoTec 19850 provide excellent protection against seawater and chlorine containing enviroments. They have a very good machinability by turning.	Properties	Apparent density: ~ 4.1 g/cm3 Melting range: ~ 1000-1100°C Hardness: typ. 120 HV hardness depends on spray parameters and may vary	Applications	Repair of ship screws Coating of metal parts from chemical engineering Protection of shafts, pistons and bearing seats Rebuilding of worn parts Coating of valve seats	Get a quote
Product description	Image LubroTec 19985 LubroTec 19985 is a water atomized NiCrFe alloy with low hardness, which makes the powder ideal for protective coating on a variety of base materials like steels, cast iron and nickel. Coatings from LubroTec 19985 provide high toughness and excellent resistance to adhesion and metal friction. They have a very good machinability by turning. The cold sprayed coatings may be inhomogenious and may have micro pores.	Properties	Apparent density: ~ 3.0 g/cm3 Melting range: ~ 1430-1450°C Hardness: typ. 200 HV hardness depends on spray parameters and may vary	Applications	Protection of wear parts against metal friction Repair of bearing seats and pistons Rebuilding worn parts	Get a quote
Product description	Image Proxon 21021 Proxon 21021 is a water atomized NiMoAl alloy with low hardness, which makes the powder ideal for protective coating on a variety of base materials like steels, cast iron and nickel. Coatings from Proxon 21021 provide an excellent resistance to adhesion, erosion and to metal friction. They are easy to machine. Based on the toughness Proxon 21021 is very much suitable as bond coat for ceramic coatings.	Properties	Apparent density: ~ 2.8 g/cm3 Melting range: ~ 1445 – 1460°C Hardness: typ. 170 HV hardness depends on spray parameters and may vary	Applications	Bond coat for ceramic and carbide coatings Protection of mechanical seats Thin and thick anti-wear coatings Coating of sliding surfaces	Get a quote
Product description	Image Proxon 21031 Proxon 21031 is a self-bonding NiCrAl alloy with a good resistance to corrosion from waste water. Coatings from Proxon 21031 have a very low coefficient of friction and provide thick deposit capability (<3mm). They are easy to machine. The deposits do not require any bond coat.	Properties	Apparent density: ~ 2.3 g/cm3 Melting range: ~ 1250 – 1400°C Hardness: typ. 280 HV hardness depends on spray parameters and may vary	Applications	Coating of parts in pulp & paper industry Protection of fan blades, shaft sleeves and roller bearing seats Coating of compressor pistons	Get a quote

Subscribe to RotoTec Cold Spray

Find your technical expert

Get in touch

Product Type

Coating

Welding

Brazing

Wear Parts

Cutting

Product name

Recommended products

Castolin Eutectic

Contact us