Choose our local websites

AustraliaAustralia

AustriaAustria

BelgiumBelgium

FR , EN , NL

BrazilBrazil

CanadaCanada

EN, FR

ChinaChina

Czech RepublicCzech Republic

FranceFrance

GermanyGermany

HungaryHungary

JapanJapan

South KoreaKorea

MexicoMexico

ItalyItaly

NorwayNorway

PolandPoland

PortugalPortugal

RussiaRussia

SpainSpain

SwedenSweden

SwitzerlandSwitzerland

FR , DE

ThailandThailand

TurkeyTurkey

United KingdomUK

UkraineUkraine

United Arab EmiratesUAE

United StatesUSA

WhertecWhertec USA

Whertec EuropeWhertec Europe

United KingdomMonitor Coatings

Trio OilTec ServicesTrio OilTec Services

Furnace Mineral ProductsFurnace Mineral Products

Professional distributionProfessional distribution

Our Cold Spray Powders Products

The following samples from Eutectic's exclusive range of welding, brazing and coating products illustrate a selection of maintenance, repair, joining and fabrication solutions. If your required product is not listed below, please contact us.  

Eutectic 13017
Ni-Cr-B-Si-Fe-Cu-Mo-C Nickel base fusible powder with enhanced resistance to corrosion.
Eutectic 13495
Ni-Cr-B-Si-Fe-C optimal combination of hardness and wear resistance with reduced tendancy for cracking.
Eutectic 13496
Ni-Cr-B-Si-Fe-C optimal combination of high hardness and wear resistance coupled with a low coefficient of friction.
Eutectic 53606
Self-fluxing, nickel-base, highly alloyed powder for spray and fuse.
ProXon® 21021
Suitable for coating large surfaces and for thick or thin coatings
ProXon® 21022
Ni-Al-Mo-Cr-B-Si alloy, additions of chromium, boron and silicon to enhance machinability and service temperature.
ProXon® 21023
No deformation or structural change in base metal. Easily machinable deposit
ProXon® 21031
Resists high-temperature corrosion, low coefficient of friction
ProXon® 21032S
Ni-Mo-Fe-Ti-Si-W alloy, nickel-base alloy offering the best combination of resistance to oxidation and corrosion.
ProXon® 21041
Ni-Cr-Al-Fe-Mo-B-Si alloy, self-bonding, nickel-chromium alloy with additions of boron and silicon to provide enhanced resistance to abrasion and erosion.
ProXon® 21071
Low coefficient of friction. Resists corrosion, even in salt-water
ProXon® 19121
Ni-Al-Mo alloy, nickel alloy one-step powder designed for use with the Rototec 1A torch.
ProXon® 19122
Ni-Al-Mo-Cr-B-Si alloy, additions of chromium, boron, and silicon give improved machinability and increased service temperature.
ProXon® 19132
Ni-Mo-Fe-Ti-Si-W alloy, self-bonding, nickel base alloy powder for use with the Rototec 1A torch.
ProXon® 19132S
Ni-Mo-Fe-Ti-Si-W alloy, coarser version of 19132.
ProXon® 19171
Cu-Al-Fe self-bonding aluminum bronze alloy for soft bearing applications.
MetaCeram® 25010
Al2O3 Aluminum oxide powder produces a hard, dense wear resistant coating suitable at elevated temperatures.
MetaCeram® 25020
Al2O3 +3% TiO2 Aluminum oxide powder produces a hard, dense wear resistant coating suitable at elevated temperatures.
MetaCeram® 25030
Al2O3 + 13% TiO2 Aluminum oxide-titanium dioxide blend that produces coatings with slightly lower resistance to abrasion than 25010 with a better grind finish.
MetaCeram® 25040
TiO2 Titanium dioxide coatings offer the best finish and provide excellent resistance to mild cavitation.
MetaCeram® 25050
Cr2O3 Chromium oxide coatings offer the best resistance to hard particle abrasion and are resistance to most acids.
MetaCeram® 25060
Al2O3 + 40% TiO2 Al oxide and titanium oxide blend that is easier to finish than 25010 and 25030
MetaCeram® 25088
ZrO2 + Al2O3 + SiO2 + TiO2 suitable for use as a thermal barrier coating to resist wetting by molten metals or hard particle abrasion.
UltraBond® 50000
Ni-Al-Mo alloy, used as a bond coat for two-step 29xxx series powders.
Eutectic® 29011
Fe-Cr-Ni-Mo-Si alloy, low carbon, 300 series austenitic stainless steel alloy offering exceleent resistance to a wide range of corrosive media.
Eutectic® 29012
Fe-Cr-Ni alloy, a high chromium martensitic stainless steel with excellent resistance to metal-to-metal wear.
Eutectic® 29021
Ni-Cr-Si-Fe-B alloy, a hard, grindable final coat formulated to reduce bearing seat wear due to severe friction.
Eutectic® 29029
Ni-Al-Mo alloy, similar to Ultrabond 50000, a nickel-base alloy used as a bond coat for two-step 25xxx and 29xxx powders.
Eutectic® 29061
Cu-Al-Fe alloy, aluminum bronze coating with good resistance to fretting wear.
Eutectic® 29077
Fe-C-Ni-Mo alloy, low carbon steel powder used as a cushion layer or for heavy build-ups.

Pages