EnDOtec® DO*6070 N
Flux cored welding wire for combined wear at extreme temperatures
This proprietary alloy produces an iron matrix with 50% of fine and uniformly orientated complex carbides resistant against both fine and coarse particles.
It is specially good when high temperatures are part of the process (58 HRC at 600°C; 42 HRC at 800°C).
It is specially good when high temperatures are part of the process (58 HRC at 600°C; 42 HRC at 800°C).
- Advanced Dispersion Hardening alloy microstructure for high level of wearfacing.
- Highly efficient complex carbides in a tenacious matrix and mesomorphic structure.
- Fine microstructure gives premium abrasion resistance to both fine and coarse particles.
- Remarkable increase of resistance to erosion.
Description
This proprietary alloy produces an iron matrix with 50% of fine and uniformly orientated complex carbides resistant against both fine and coarse particles.
It is specially good when high temperatures are part of the process (58 HRC at 600°C; 42 HRC at 800°C).
It is specially good when high temperatures are part of the process (58 HRC at 600°C; 42 HRC at 800°C).
- Advanced Dispersion Hardening alloy microstructure for high level of wearfacing.
- Highly efficient complex carbides in a tenacious matrix and mesomorphic structure.
- Fine microstructure gives premium abrasion resistance to both fine and coarse particles.
- Remarkable increase of resistance to erosion.
Applications
- Iron and Steel: repair of sinter crushers
- Cement: Fuller plates
- Ceramic: oven outlet ramp, screw feeders
- Energy: end feed ramp blower nozzles
- Woodpanels: press screw, fan blades
- Agriculture: impellers
- Sugar cane: Blades of fans
Related Documents
Technical Data
Typical Hardness
69 HRC
Current & Polarity
DCEP (+)
Castolin Eutectic
