Our Gas Shielded Cored Wire Alloys Products

The following samples from Castolin Eutectic's exclusive range of welding, brazing and coating products illustrate a selection of maintenance, repair, joining and fabrication solutions. If your required product is not listed below, please contact us.
 

EnDOtec® DO*8336
Dispersion Hardening «DH» Wearfacing Alloy Range
EnDOtec® DO*257
EnDOtec Seamless SCW Range “Solid Cored Wires”
EnDOtec® DO*310
EnDOtec Seamless SCW Range “Solid Cored Wires”
EnDOtec® DO*351
EnDOtec Seamless SCW Range “Solid Cored Wires”
EnDOtec® DO*322
Gas-shielded metal cored wire developed for producing multi pass, anti-wear coatings on parts subject to abrasion and erosion by small particles.
EnDOtec® DO*327
Gas-shielded metal cored wire developed for producing multi pass, crack-free coating of parts subject to wear by combined abrasion and impact with high pressures.
EnDOtec® DO*332
Gas-shielded metal cored wire developed for multi pass, anti-wear coatings having excellent resistance to abrasion and moderate impact.
EnDOtec® DO*390N
Gas shielded, unique NanoAlloy metal cored wire developed for anti-wear coatings extremely resistant to abrasion, erosion combined with minimal impact on carbon, low alloy, stainless and cast steel parts.
EnDOtec® DO*02
Gas-shielded metal cored wire developed for welding difficult-to-weld steels, armour plate and manganese steel.
EnDOtec® DO*04
Gas-shielded metal cored wire develped for producing anti-wear coating depositing steel alloyed with chromium, cobalt and molybdenum. Excellent resistance to wear by metal-to-metal friction, mechanical properties stable up to 500°C.
EnDOtec® DO*06
Gas-shielded metal cored wire developed for producing anti-wear coatings with High Speed Steel properties for fabrication or repair of damaged tools. Increased resistance to shock, pressure, cracking and oxidation at high temperature.
EnDOtec® DO*15
Gas-shielded metal cored wire developed for producing anti-wear coatings on parts subject to impact, abrasion and contact fatigue.
EnDOtec® DO*16
Gas-shielded metal cored wire developed for producing anti-wear coatings having excellent resistance to shocks and to pressures up to 550°C.
EnDOtec® DO*28 S
Gas-shielded metal-flux cored wire intended for welding AISI 316 L type steel.
EnDOtec® 36
Gas-shielded continuous electrode for joining and anti-corrosion coating of low carbon CrNiMo stainless steels
EnDOtec® DO*53 S
Gas-shielded metal flux cored wire intended for welding hydropower components
EnDOtec® DO*55
Gas-shielded metal cored wire Maraging type for anti-wear coatings for injection moulds aluminium castings
EnDOtec® DO*66 S
Gas-shielded rutile flux cored wire alloyed with nickel developed for welding structural steel
EnDOtec® DO*05
Gas-shielded metal cored wire developed for producing work hardening anti-wear coatings, having an excellent resistance to impacts, pressure and high stress abrasion.
EnDOtec® DO*11
Gas-shielded metal cored wire developed for producing anti-wear coatings (tungsten carbides in a nickel based matrix) in combination with heat and corrosion.
EnDOtec® DO*33
Gas-shielded metal cored wire developed for producing anti-wear coatings having excellent resistance to abrasion and erosion at high temperatures up to 650°C.
EnDOtec® DO*30
Gas-shielded metal cored wire developed for producing single pass, anti-wear coatings on parts subject to abrasion and erosion by small particles.
EnDOtec® DO*31
Exclusive, gas shielded, metal cored alloy wire, ideal for maintenance and repair applications or batch manufacturing where highest integrity welding, efficiency and productivity are required.
EnDOtec® DO*329
Special and exclusive alloy, with a small diameter, ideal for maintenance and repairs, where high efficiency and productivity are required.
EnDOtec® DO*84
Exclusive, gas shielded, metal cored alloy wire, ideal for maintenance and repair applications or batch manufacturing where highest integrity welding, efficiency and productivity are required.
EnDOtec® DO*13
Gas-shielded metal cored wire developed for producing anti-wear coatings, having a high resistance to pressure, impacts and moderate abrasion.
EnDOtec® DO*48
Gas-shielded metal cored wire developed for producing anti-wear coatings (tungsten carbides in an iron base matrix) on parts subject to severe abrasion or erosion combined with moderate pressure and impacts.
EnDOtec® CaviTec GMA & SMA
Uniquely Engineered Electrodes and Wires Designed to Resist Severe Cavitation-Erosion Damage
EnDOtec® DO*23
Gas-shielded metal cored innovative nickel alloy wire developed for welding cast iron assemblies or rebuilding.
EnDOtec® DO*60
Gas-shielded metal cored wire depositing a Grade 6 type cobalt base alloy. Excellent resistance to heat, corrosion, wear, cavitation and metal-to-metal friction.

Pages