Passar para o conteúdo principal
Indústrias

Mineração

Especialistas em aplicações de exploração, produção e processamento.

Choose a category

shutterstock_162274277_drilling drill ground-min

Um processo de corte que utiliza ferramentas rotativas poderosas

Perfuração
shutterstock_162274277_drilling drill ground-min

As ferramentas de perfuração trabalham com materiais abrasivos de diferentes durezas, texturas e dimensões, como o granito, quartzo, basalto, cascalho, etc. O funcionamento principal destes motores varia de acordo com o trabalho realizado pela fragmentação por percussão das camadas compactas do solo que são menos cliváveis ou mediante perfuração e transporte através da rotação do material que é menos compacto e relativamente clivável.

Estas ferramentas de percussão (varetas) sofrem de forma geral importantes impactos e abrasão. A escolha das ligas é, portanto, orientada para depósitos de trabalho a frio resistentes a restrições.

shutterstock_137398853_shearer_mining

Dê uma segunda vida às ferramentas

Mineradores
shutterstock_137398853_shearer_mining

Para ferramentas que cortam mediante rotação (broca, vareta de perfuração), o tipo de desgaste deriva principalmente da abrasão combinada com uma pressão fraca na superfície. A escolha recai em ligas que apresentam uma boa resistência ao desgaste contra impactos médios e abrasão sob fraca pressão.

shutterstock_294917552_augers for drilling-min

Proteção de liga contra impactos e abrasão

Brocas
shutterstock_294917552_augers for drilling-min

Cada ferramenta é específica e as condições de funcionamento dependem da natureza do solo. No entanto, são normalmente observadas duas possibilidades de aplicação:

A proteção contra o desgaste e abrasão com uma liga de depósito de tipo ferro fundido de cromo, nos casos em que as ferramentas sofrem poucos impactos.

Frequentemente, estas ferramentas estão sujeitas a impactos que danificam os cabos de proteção. Neste caso, é escolhido o depósito de uma liga que contém carboneto de tungsténio numa matriz pouco sensível a impactos.

 Laser cladded wear liners are the ultimate choice for high wear resistance in a lightweight design.​

CUTTING-EDGE LASER CLAD WEAR LINERS

CDP® LaserMax​
 Laser cladded wear liners are the ultimate choice for high wear resistance in a lightweight design.​

Avoid equipment failures and drastically reduce downtime with the most lightweight wear protection available with superior surface hardness.  CDP LaserMax is the optimal choice for protecting mining parts exposed to high wear with minimum component stress, including mine ventilation fans, mine skips, conveying systems, and certain material handling systems.​

​Our laser clad wear plate is metallurgically bonded with wear-resistant proprietary alloys in an ultra-thin design.  The powder becomes the sacrificial layer on the base plate, offering maximum protection at minimum weight.​

  • ​Superior surface hardness ​
  • Ease of handling and installation​

  • Improved mine safety and work environment​

  • Light-weight alternative with reduced energy consumption​

  • Increased sustainability

Lafarge Wössingen Brecher 09.02.09 008

Sujeito a abrasão

Rotor triturador
Lafarge Wössingen Brecher 09.02.09 008

O rotor é a peça principal do triturador, pois ajuda a apertar os batedores com a ajuda dos cantos de fixação. Os discos mecânicos soldados estão sujeitos a abrasão devido à ação das partículas nas partes externas do disco. Recomenda-se um revestimento preventivo nestas peças e nos flancos.

chrome white iron parts in high wear areas protect chutes and buckets from abrasion and impact​

ENHANCE OVERALL WEAR LIFE WITH CASTOCHROME CASTINGS

Wear Castings Applications 
chrome white iron parts in high wear areas protect chutes and buckets from abrasion and impact​

Fixed Plant​

  • Mill feed & discharge chutes​

  • Transfer & load-out chutes​

  • Skip discharge chutes​

  • Surge bins and receiving hoppers​

  • Conveyor skirt liners​

  • Vibratory and grizzly feeders​

  • Apron & pan feeders​

​Mobile Plant:​

  • Dragline buckets​

  • Electric rope shovels​

  • Wheel loader buckets​

  • Dozer blades​

  • Truck boxes​

conveyor_belt

Evite falhas nos equipamentos

Transportadores de corrente de arrasto
conveyor_belt

Os transportadores de corrente de arrasto são ideais para transportar materiais como madeira, carvão, cal ou resíduos quando é necessária uma alteração da elevação e em longas distâncias. Infelizmente, a natureza abrasiva do material transportado afeta negativamente a vida útil do equipamento

  • desgaste da superfície do transportador,
  • aumenta as forças necessárias para puxar a corrente.

Na maior parte das vezes, aparece um elevado desgaste no curso da corrente. Como resultado, a superfície perde a sua lisura, as forças aumentam, a corrente sofre danos e as peças devem ser substituídas regularmente para evitar falhas no equipamento.

wss

4 vezes mais resistente do que o aço temperado tradicional

Tiras de Desgaste Deslizantes (WSS)
wss

Há muitos anos que na Castolin Eutectic protegemos as superfícies dos transportadores dos nossos clientes com as nossas conhecidas placas de desgaste CDP®. O CDP® polido premium também tem vindo a ser instalado quando uma superfície de baixa fricção assim o necessita. Hoje em dia, com base num conceito semelhante, oferecemos um WSS fácil de instalar que protege o curso da corrente contra abrasões e atritos severos. O WSS é um material composto feito de aço macio e de uma liga específica de elevada resistência ao desgaste e com um baixo coeficiente de fricção. Para garantir boas propriedades de deslizamento e reduzir o consumo de energia do transportador de corrente, a superfície da tira está polida. Como resultado, as nossas tiras são pelo menos 4 vezes mais resistentes do que o aço temperado tradicional. A superfície permanece mais lisa por muito mais tempo, reduzindo eventualmente também os danos à corrente. As WSS também são apropriadas para máquinas que precisam de suportar forças e vibrações elevadas enquanto trabalham em ambientes abrasivos.

CastoTube pipes ready to be shipped to provide ultimate wear resistance in slurry transportation

BENCHMARK BACKFILL SLURRY WEAR PERFORMANCE​

The CastoTube® Advantage​
CastoTube pipes ready to be shipped to provide ultimate wear resistance in slurry transportation

Where safety meets efficiency and productivity​

  • Benchmark performance | Reduced cost per tonne ownership ​

  • Engineered pipe connections | Efficient retrofit and new installations​

  • Process controlled cladding ensures superior performance ​

  • Technical support | Site-specific wear surveys and performance monitoring ​

  • Mine contractor grade offerings | Ease of installation & impact resistant formula

Engineered, wear resistant pipes for slurry handling in mining and mineral processing

ECONOMICAL WEAR RESISTANT PIPES FOR SLURRY BACKFILL TRANSPORTATION​

MeCaPipe™​
Engineered, wear resistant pipes for slurry handling in mining and mineral processing

MeCaPipe is our economical alternative to CastoTube wear pipes.  MeCaPipe incorporates the high-performing MeCaTeC lining technology to offer an alternative solution for general slurry applications. Combined with CastoTube, MeCaPipe can meet specific client requirements to provide the adequate level of protection against abrasion, erosion and corrosion. For a seamless wear performance, the lining thickness is typically selected based on the finished ID to match the existing piping system. ​

​MeCaPipe is engineered to withstand slurry wear and erosion. It outlasts traditional piping materials, minimizing costly changeouts and providing enhanced performance and operational efficiency. MeCaPipe can be easily repaired or relined to prolong life.​

​Our team will work closely with your mine to deliver the right pipe lining solution to optimize your slurry backfill transportation systems.​

​Contact us for an expert wear pipe analysis.​

worker applying a trowel-grade wear compound inside a mining equipment for abrasion and erosion protection

​​​​​​MINE-GRADE WEAR COMPOUNDS FOR ABRASION, EROSION AND CORROSION PROTECTION

Engineered Polymers to Repair, Rebuild & Protect
worker applying a trowel-grade wear compound inside a mining equipment for abrasion and erosion protection

From repair and rebuild to corrosion resistant barrier coatings, MeCaTeC offers an industry-leading range of engineered polymers that will perform in the most demanding mining applications.  MeCaTeC is the ideal solution for quick surface and part repair.  It instantly bonds to the surface with no welding, becoming a sacrificial layer that provides abrasion and erosion protection.  Its cold bonding feature eliminates the need for a Hot Work Permit.​

​MeCaTeC is the ultimate protection layer for the demanding resurfacing requirements. Protect your assets with MeCaTeC!​

​Typical Applications include:​

  • Ceramic tile and rubber lining replacement  ​

  • Cyclones, chutes, bins and transfer points​

  • Pipe elbows and slurry pipes​

  • Slurry pumps​

  • Screw conveyors​

  • Bag house 

Crusher backing compounds are a cost-effective way to protect crushing machines from friction, vibration and wear

HIGH PERFORMANCE CRUSHER BACKING COMPOUNDS

MeCaBack Next-Gen Solution for Crusher Equipment Maintenance​
Crusher backing compounds are a cost-effective way to protect crushing machines from friction, vibration and wear

Crusher backing compounds are a cost-effective way to protect crushing machines from friction, vibration and wear. ​

​Our innovative line of crusher backing compounds is specifically designed to reinforce the liner, fill voids, reduce vibration and eliminate friction in rock crushing heavy machinery.  It is easily applied between both gyratory and cone crusher liners and the crusher body part.​

MeCaBack is an excellent choice of a crusher compound for mining, mineral processing and aggregate equipment including:​

  • Crushing machines​

  • Cone & stone crushers​

  • Grinding mill liners​

  • Backing plates​

  • Lock bushings​

sprayable corrosion and erosion resistant polymer coating for fan blades

PERFECT COMBINATION OF SAFETY, PERFORMANCE AND COST SAVINGS

The MeCaTeC® Advantage​
sprayable corrosion and erosion resistant polymer coating for fan blades
  • Proprietary formula with Kevlar fiber interlocking technology ​

  • Engineered ceramic fillers to maximize wear performance​

  • Optimized packaging for faster mixing during shutdown repairs ​

  • Excellent alternative to replace ceramic tiles and rubber linings​

  • Rapid-cure formula ensures a quick return to service​

  • Easy to apply with trowel, brush, MeCaSpray gun, or airless spray​

  • On-site Technical Support with industry-leading expertise and application know-how

Pergunte a um especialista

Descubra outras indústrias

Mensagem de estado

Sorry…This form is closed to new submissions.
Partilhamos o nosso conhecimento em soldadura branda, soldadura forte e revestimento
Brochuras
CDP® 4624
Wear parts English
CDP® 4624

CDP® XuperWave 4624 DXW is the ideal wearplate for the application where the right balance between price and service life is required

Wear parts English
CDP® 1001

Readily weldable base plate for fast installation