Ana içeriğe atla

AirJet 625

Robust construction for rugged use...

AirJet 625

Robust construction for rugged use on construction sites
The AirJet 625 and AirJet 1038 are portable plasma cutting units of the latest inverter generation for cutting with compressed air. Compact size, low weight, low energy consumption at high cutting performance and generator-compatibility are advantages when used in production, in assembly and for repair work. The electronics and the components are kept separate from the flow of cooling air and are thereby optimally protected from contamination. A wide range of different cutting elements for the burner makes it possible to also use it for more complicated work, for example, cutting in grooves or for gouging. All conductive materials can be cut without any problems and with good results, such as non-alloyed and low-alloy steel, aluminium, CDP® wear plates or castings.
  • The innovative ignition system without HF contributes to the extended service life of the electrodes
  • Concentrated plasma flow through an optimised air flow at high speed, linked with a special electrode and nozzle design. The plasma flow increases the cutting speed and the performance.
  • The nozzle and the electrode are cooled by the air flow - the service life is thereby considerably extended.

Açıklama

The AirJet 625 and AirJet 1038 are portable plasma cutting units of the latest inverter generation for cutting with compressed air. Compact size, low weight, low energy consumption at high cutting performance and generator-compatibility are advantages when used in production, in assembly and for repair work. The electronics and the components are kept separate from the flow of cooling air and are thereby optimally protected from contamination. A wide range of different cutting elements for the burner makes it possible to also use it for more complicated work, for example, cutting in grooves or for gouging. All conductive materials can be cut without any problems and with good results, such as non-alloyed and low-alloy steel, aluminium, CDP® wear plates or castings.
  • The innovative ignition system without HF contributes to the extended service life of the electrodes
  • Concentrated plasma flow through an optimised air flow at high speed, linked with a special electrode and nozzle design. The plasma flow increases the cutting speed and the performance.
  • The nozzle and the electrode are cooled by the air flow - the service life is thereby considerably extended.

İlgili belgeler

Teknik Veri

Mains voltage
3 x 400 V ± 15%
Mains fuse
16 AT
Cutting current
20 - 60 A
Pilot current
20 A
Cutting current at 40%
60 A
Cutting current at 60%
50 A
Cutting current at 100%
40 A
No-load voltage
320 V
Power factor cosφ
0,9
Max. cutting thickness (steel)
30 mm
Protection class
IP 23
Dimensions (LxBxH) mm
510 x 247 x 389
Weight
22 kg
Air consumption
130 l/min ± 20% at 5.5 bar
Compressed air pressure min
5 bar

Castolin Eutectic

Sizin için kolaylaştıracağız

customer service
Sorularınızı yanıtlamaktan memnuniyet duyarız
customer service 2
Müşteri hizmetlerimizden memnun kalmanız bizim için önemlidir
castolin eutectic services
Onarırız, yeniden inşa ederiz ve yıpranmaya karşı koruma kaplaması yaparız