Choose MeCaTeC© product by application

Choose MeCaTeC® product by application & key benefits

MeCaFix© 100 Express


Type

A fast curing MeCaFix 100 is a fast setting metal filled emergency repair polymer. MeCaFix 100 Express is a two component polymer with a 1 to 1 ratio by volume. The working life is 3 minutes and it is ready to sand within 1 hour.

Applications

  • Piping
  • Cold bonding adhesive
  • Castings
  • Leaks
  • Threads
  • Resurfacing metal loss
  • Wood repair
  • Polymer shimming

Key Benefits

  • Extremely fast dry to touch time
  • Low temperature cure
  • Excellent adhesive properties
  • Suitable for live repair of active leaks
  • The go to repair product for rapid maintenance repairs

Other

Return to service (25°C / 77 °F): 60 minutes

Mix Ratios: 1:1 by volume, 2:1 by weight

Max. Operating Temp.: Wet Service: 40°C (104°F), Dry Service: 48°C (120°F)

 

MeCaFix© 120


Type

It cures at temperature down to 0°C (32 °F) enabling cold weather applications. Specially formulated to protect working surfaces in all positions against wear by a wide variety of corrosive liquids, abrasive media, slurry erosion and cavitation effects.

Applications

  • Butterfly and gate valves
  • Tube sheets
  • Propellers
  • Resurfacing metal loss
  • Pump housings and impellers
  • Scored hydraulic rams
  • Cracked casing

Key Benefits

  • Low temperature cure
  • Excellent adhesive properties
  • Excellent sag resistance for thick applications
  • Designed to be precision machined with low defects
  • Exceptional resistance to pressure and deformation

Other

Return to service (25°C / 77 °F): 12 hours

Mix Ratios: 3:1 by volume, 4:1 by weight

Max. Operating Temp.: Wet Service: 50°C (122°F), Dry Service: 90°C (195°F)

 

MeCaWear© 300


Type

Specially formulated to protect working surfaces against wear by abrasion and erosion. The reinforced silicon carbide ceramic composite matrix is easily brushed or applied by MeCaSpray . The polymer technology is elastomeric modified to reduce film brittleness and improve both impact and abrasion resistance.

Applications

  • Cyclones
  • Hoppers/Chutes
  • Duct work
  • Augers
  • Fan blades
  • Pump Casings/lining
  • Screws

 

Key Benefits

  • Elastomeric modified for improved impact and abrasion resistance
  • Reinforced with silicon carbide
  • Provides a super smooth coating surface
  • Designed for sliding and slurry abrasion
  • Can be applied by brush or MeCaSpray

 

Other

Return to service (25°C / 77 °F): 5 days

Mix Ratios: 4:1 by volume, 6.21:1 by weight

Max. Operating Temp.: Wet Service: Wet Service: 50°C (122°F), Dry Service: 90°C (195°F)

 

MeCaWear© 350


Type

Fine sized silicon carbide and alumina ceramic filled to offer higher film build and maximum abrasion resistance. This hybridized inorganic/organic novolac polymer chemistry is designed to offer ultra high glass transition temperature for extreme high temperature abrasion service.

Applications

  • Baghouse/Duct work
  • Wearplate
  • Air heater
  • Cyclones
  • Pulverizers
  • Fly ash separators

Key Benefits

  • Ultra high temperature resistance
  • Reinforced with silicon carbide
  • Good film and release properties
  • Can be applied by brush or MeCaSpray

Other

Return to service (25°C / 77 °F): 24 hours

Mix Ratios: 4:1 by volume, 7.3:1 by weight

Max. Operating Temp.: Wet Service: 150°C (300°F), Dry Service: 270°C (518°F)

 

MeCaWear© 400


Type

Medium size spherical and platy alumina ceramic filled to offer higher film build and maximum abrasion resistance. Specially formulated to protect working surfaces against wear in severe erosion and abrasion environments. Coating system is modified with elastomeric toughening technology to improve crack and impact resistance.

Applications

  • Pipe elbows, chutes for clinker, cement, sand
  • Slurry tank bottoms
  • Coal pulverizers and exhausters
  • Pump housings, impellers, lining
  • Screw conveyors

Key Benefits

  • Highest impact resistance
  • Loaded with treated angular and ceramic alumina beads
  • Reinforced with Kevlar
  • Excellent alternative to ceramic tile

Other

Return to service (25°C / 77 °F): 72 hours

Mix Ratios: 4:1 by volume, 6.51:1 by weight

Max. Operating Temp.: Wet Service: 50°C (122°F), Dry Service: 90°C (195°F)

 

MeCaWear© 450


Type

Medium size spherical and platy alumina ceramic filled verion of MecaWear 350 to offer higher film build and maximum abrasion resistance. Kevlar modified to strengthen the polymer matrix. This is a trowel grade material.

Applications

  • Baghouse/Duct work
  • Pump lining
  • Elbows
  • Fan blades

Key Benefits

  • Excellent alternative to ceramic tile for high temperature service
  • High surface hardness
  • Loaded treated angular and ceramic alumina beads
  • Reinforced with Kevlar

Other

Return to service (25°C / 77 °F): 24 hours

Mix Ratios: 4:1 by volume, 7.3:1 by weight

Max. Operating Temp.: Wet Service: 150°C (300°F), Dry Service: 270°C (518°F)

 

MeCaWear© A5


Type

High performance trowel grade ceramic polymer coating containing a high volume percentage of platy alumina and silicon carbide particles. Additions of Kevlar fibers reinforce the matrix promoting exceptional resistance to abrasion and erosion.

Applications

  • Repair and replace ceramic tile
  • Pipe elbows, chutes
  • Ash handling pipes and valves
  • Coal pulverizers and exhausters
  • Slurry pumps / Screw conveyors

Key Benefits

  • Economical and easy to use trowel grade wear protection
  • Sag resistant for high film build
  • Great for odd shapes or to create wear pads
  • Surface finish is semi rough and easily topcoated with MeCaWear 300

Other

Return to service (25°C / 77 °F): 12 hours

Mix Ratios: 3.81:1 by volume, 4:1 by weight

Max. Operating Temp.: Wet Service: 50°C (122°F), Dry Service: 90°C (195°F)

 

MeCaWear© A5HT


Type

Specially formulated trowel grade coating designed to protect working surfaces at high temperature against wear in severe erosion and abrasion environments. The tough, composite matrix is reinforced with ultra resilient Kevlar fibres and a dense dispersion of hard, wear resistant ceramic phases.

Applications

  • Repair and replace ceramic tile
  • Pipe elbows, chutes
  • Coal pulverizers and exhausters
  • Pump housings, impellers, lining
  • Slurry pumps / Screw conveyor

Key Benefits

  • Economical and easy to use wear protection
  • Sag resistant for high film build
  • Great for odd shapes or to create wear pads
  • Surface finish is semi rough and easily topcoated with MeCaWear 350

Other

Return to service (25°C / 77 °F): 48 hours

Mix Ratios: 4:1 by volume, 4:1 by weight

Max. Operating Temp.: Wet Service: 60°C (140°F), Dry Service: 165°C (330°F)

 

MeCaCorr© 700


Type

Elastomer epoxy hybrid coating with exceptional adhesion and sag resistance. Designed to provide resistance in wastewater service and is well suited for coating concrete surfaces.

Applications

  • Concrete protection
  • Pipelines
  • Sewer pipe
  • Digestor tanks
  • Manholes
  • Penstocks
  • Lift stations
  • Forcemains

Key Benefits

  • Economical and easy to use
  • Designed for immersion service
  • Versatile corrosion protection suitable for a variety of substrates
  • Cures under cold and damp conditions

Other

Return to service (25°C / 77 °F): 72 hours

Mix Ratios: 1:1 by volume, 0.87:1 by weight

Max. Operating Temp.: Wet Service: 50°C (122°F), Dry Service: 85°C (185°F)

 

MeCaCorr© 710


Type

High performance multi functional novolac based silicon carbide ceramic polymer coating designed for immersion service with exceptional resistance to warm water service up to 65 deg C.

Applications

  • Heat exchanger
  • Tube sheet / Water box
  • Pipelining
  • Storage tanks
  • Turbines
  • Waste water
  • Sea water
  • Hydrocarbons

Key Benefits

  • Economical and easy to use
  • Designed for immersion service
  • Versatile corrosion protection suitable for a variety of substrates
  • Cures under cold and damp conditions

Other

Return to service (25°C / 77 °F): 24 hours

Mix Ratios: 2:1 by volume, 1.82:1 by weight

Max. Operating Temp.: Wet Service: 65°C (150°F), Dry Service: 100°C (212°F)

 

MeCaCorr© 750


Type

The polymer matrix is specifically designed to achieve wear and chemical resistance characteristics for the restoration and protection of metallic surfaces subjected to harsh corrosion and chemical attack. It provides outstanding chemical resistance allowing it to be used in a wide variety of chemicals including crude oil and sulphuric acid service.

Applications

  • Penstock lining
  • Pipe coating
  • Petroleum tanks
  • Chemical tanks
  • Heat exchangers

Key Benefits

  • Glass flake modified
  • Excellent chemical resistance
  • Outstanding performance in acid service
  • Fast cure and return to service

Other

Return to service (25°C / 77 °F): 5 days

Mix Ratios: 2:1 by volume, 1.88:1 by weight

Max. Operating Temp.: Wet Service: 95°C (200°F), Dry Service: 150°C (300°F)

 

MeCaCorr© 780


Type

Unique ceramic hybrid epoxy coating that incorporates an advanced molecular cross-linking of inorganic and organic chemistry to provide a thermally stable high performance polymer matrix. The matrix is designed to achieve maximum corrosion protection and temperature resistance in immersion service.

Applications

  • Tank lining
  • Scrubbers
  • Pipe lining
  • Immersion heater
  • Stack lining
  • Heat exchanger

Key Benefits

  • Highest temperature resistant polymer coating
  • Excellent under rapid decompression service
  • Resistant to steam out
  • Outstanding corrosion protection

Other

Return to service (25°C / 77 °F): 5 days

Mix Ratios: 4:1 by volume, 8.28:1 by weight

Max. Operating Temp.: Wet Service: 180°C (356°F), Dry Service: 243°C (470°F)