Bevonatokhoz használt anyagok

A Castolin Eutectic következő példái a hegesztés, forrasztás, és bevonatolás anyagainak különleges felsorolásai, amelyek a karbantartás, javítás, kötéstechnológia és gyártás különféle megoldásaihoz bemutatják a választékot. Amennyiben az Ön által igényelt termék nem szerepel az alábbi választékban, lépjen kapcsolatba velünk.  

Eutalloy® 10009
Alloy Ni-Cr-B-Si-Fe. Low friction coefficient.
Eutalloy® RW 12497
Excellent resistance to friction and corrosion
Eutalloy® RW 12999
Excellent resistance to high-pressure abrasion
EuTroLoy 16006
Alloy Co-Cr-W-Ni-Fe (Gr. 6 Type). Very good metal to metal friction properties, not prone to adhesion.
EuTroLoy 16012
Alloy Co-Cr-W-Ni-Fe (Gr. 12 Type). Excellent resistance to high-temperature oxidation.
EuTroLoy 16221
Excellent bonding with lamellar and spheroidal graphite grey cast iron, as well as steel.
RotoTec 19400
No deformation or structural change in base metal. Hard but fully machinable deposit
RotoTec 19850
Dense, fully machinable deposit. Very low coefficient of friction
RotoTec 19985
Very low coefficient of friction, even under pressure
RotoTec 19999
Excellent resistance to abrasion, low coefficient of friction
ProXon® 21021
Suitable for coating large surfaces and for thick or thin coatings
Eutalloy® 10112
Ni-Cr-B-Si-Fe alloy and tungsten carbide. 60% tungsten carbides.
ProXon® 21023
No deformation or structural change in base metal. Easily machinable deposit
ProXon® 21031
Resists high-temperature corrosion, low coefficient of friction
ProXon® 21071
Low coefficient of friction. Resists corrosion, even in salt-water
EuTronic® Arc 502
Alloy Fe-Cr-Ti-Si-Mn
EuTronic® Arc 509
Alloy Fe-Cr-Al-Mo
EuTronic® Arc 532
Alloy Fe-Cr-Mn-C
EuTronic® Arc 563
Alloy Fe-Ni-AI-Mo
EuTronic® Arc 595
Alloy Fe-Cr-B-Si-Nc-C
MetaCeram® 28030
Ceramic powder for anti-wear protective coatings of all types of metals, except pure copper and magnesium.
MetaCeram® 28085
Ceramic powder for thermal spray anti-wear protective coatings on steels and other alloys, except pure copper and magnesium.
Eutalloy® 10185
Alloy Ni-B-Si. Well suited for metal-to-metal friction. Excellent corrosion resistance.
MetaCeram® 28095
Molybdenum base alloy powder for anti-wear protective coatings of all types of metals, except pure copper and magnesium.
MeCaTeC® 102P
Precision machinability
MeCaTeC® 103F
Kevlar fibres for resilience. Medium thick coatings
MeCaTeC® A3
Kevlar fibres for resilience. Medium thick coatings
MeCaTeC® A5
Kevlar fibres for resilience. Very thick coatings
MeCaTeC® A5 HT
Service temperatures up to 250°
MeCaTeC® A6SH
Super-tough spherical beaded wearing compound

Oldalak