Our Products

The following samples from Eutectic's exclusive range of welding, brazing and coating products illustrate a selection of maintenance, repair, joining and fabrication solutions. If your required product is not listed below, please contact us.  

TeroJet® 55-116
Gas Atomized, Type 316L Stainless Steel Alloy Made for the Thermal Spray Process
EuTroLoy 16006
Alloy Co-Cr-W-Ni-Fe (Gr. 6 Type). Very good metal to metal friction properties, not prone to adhesion.
EuTroLoy 16410
Fe-Cr multi-component alloy
TeroMatec® 5007
High chromium multi-carbide alloy for hardsurfacing components subject to extremely severe abrasive wear and heavy impact up to 300°C
TeroMatec® 5009
Tubular wire for self shielded metal arc hardfacing
TeroMatec® Fine Wires 5022 FW
Premium Open Arc Wearfacing Wire. For impact, High Compression Loading and Combined Abrasion.
TeroMatec® Fine Wires 5256 FW
Premium Open Arc Wearfacing Wire. The New Standard for Combating Abrasion.
TeroMatec® Fine Wires 5306 FW
Small Diameter Flux-Cored Wire Formulated to Combat Both Grinding and Gouging Abrasion as well as Light Impact.
TeroMatec® Fine Wires 5716 FW
Premium Open ArcWearfacing Wire. For Combating Abrasion with Impact
TeroMatec® Fine Wires 56 FW
Premium Open Arc, Wearfacing Wire. For Combating the Most Extreme Forms of Abrasion
Eutalloy® 11498
Ni-B-Si-Fe a nickel base fusible alloy designed for sealing, cladding, filling and joining cast irons.
Eutalloy® 1202
Ni-B-Si a nickel-base fusible alloy designed for sealing, cladding, filling and joining cast irons.
Eutalloy® 1203
Ni-B-Si a slightly less hard nickel-base fusible alloy designed for sealing, cladding, filling and joining cast irons.
EuTroLoy 16494
Ni-Cr-B-Si-Fe alloy for crack sensitive metals
Eutalloy® 1204
Ni-B-Si specially formulated nickel-base fusible alloy designed for optimized surface finishing.
Eutalloy® 1205
Ni-B-Si a mid range hardness alloy with excellent puddle control and a good combination of wear resistant properties.
Eutalloy® 1206
Ni-B-Si specially formulated nickel-base fusible alloy designed for coating preheated mold necks.
Eutalloy® 1210
Ni-B-Si a unique mid range hardness alloy with exceptional wettability and point-to-point deposition control.
Eutalloy® LT PE8418
Self fluxing nickel-base alloy, low energy input for the fusion and spot repairs
Eutalloy® LT PE8422
Self fluxing nickel-base alloy, low energy input for the fusion and small to medium repairs.
Eutalloy® LT PE8426
Self fluxing nickel-base alloy, low energy input for the fusion and fast deposition.
Eutalloy® LT PE8431
Self fluxing nickel-base alloy with the addition of Cr and Mo, low energy input for the fusion and good wetting properties.
Eutalloy® LT PE8435
Self fluxing nickel-base alloy with the addition of Cr and Mo, low energy input for fusion enhanced fluidity and fast deposition.
Eutalloy® LT PE8440
Self fluxing nickel-base alloy with the addition of Cr and Mo, low energy input for fusion enhanced fluidity and fast.
EuTroLoy 16495
Ni-Cr-B-Si-Fe alloy to fight abrasion and erosion
Eutectic 9001
Ni-B-Si a medium hardness alloy specifically developed to reduce overspray with improved fluidity and machinability.
Eutectic 9002
Ni-B-Si a low hardness alloy specifically developed to reduce overspray with improved fluidity and machinability.
Eutectic 9003
Ni-B-Si a soft to medium hardness alloy specifically developed to reduce overspray with improved fluidity and machinability.
Eutectic 9005
Ni-B-Si an intermediate hardness alloy with a good combination of hardness and wear resistance coupled with good mchining properties.
Eutalloy® CPW 5127
Ni-Cr-B-Si-Fe alloy and tungsten carbide. A blend of nickel-base fusible alloy plus 50% cast and crushed tungsten carbides.

Pages