Our Products

Následující vzorky z výhradního sortimentu produktů svařování, pájení a žárových nástřiků společnosti Castolin Eutectic ilustrují výběr řešení v oblasti údržby, oprav, spojování a výroby. Pokud není Vámi požadovaný produkt v níže uvedeném seznamu, kontaktujte nás prosím.  

EutecTrode® XuperAbraTec 5006
Manual electrode for anti-wear protective coating against combined abrasion, pressure and moderate impact on steel components including low alloy and manganese steels
TeroMatec® 3302
Self shielded cored wire developed for anti-wear coating of low or alloy steel parts in multiple passes which work harden with impact / pressure.
TeroMatec® 3205
Self shielded cored wire developed for anti-wear coating of low or alloy steel parts with work hardening properties against heavy impact, pressure and friction.
TeroMatec® 3220
Self shielded cored wire developed for anti-wear coating of low or alloy steel parts with work hardening properties against heavy impact, pressure and friction.
TeroMatec® 3952
Self shielded cored wire developed for coating parts subject to hot abrasion up to service temperature of 600°C.
TeroMatec® 4415
Self shielded cored wire developed for anti-wear coating of low or alloy steel parts to resist impact and abrasion up to service temperature of 500°C.
ProXon® 21021
Suitable for coating large surfaces and for thick or thin coatings
TeroMatec® 4601
Self shielded cored wire developed for coating parts subject to abrasion without impact
TeroMatec® 4625
Self shielded cored wire developed for coating parts subject to abrasion, pressure and moderate impact.
TeroMatec® 4630
Self shielded cored wire developed for anti-wear coating of low or alloy steel parts in single pass to resist severe abrasion and erosion by fine particles.
TeroMatec® 4660
Self shielded cored wire developed for coating parts subject to abrasion by medium and large entities
TeroMatec® 4923
Self shielded cored wire developed for crack-free coating of parts subject to wear by combined abrasion and impact with high pressures.
TeroMatec® 4395N
Self shielded, unique NanoAlloy cored wire developed for anti-wear coatings extremely resistant to abrasion and erosion on carbon, low alloy, stainless and cast steel parts.
 iD Weld 2501
This process is a unit for welding, circular exteriors and interiors intended mainly for coating of internal bores from Ø 30 mm
 PowerMax
Manual electric welding and TIG welding with a single unit connected to 230 V DC
 XuperMax 2500
Powerful, compact, efficient
 CastoMatec RCD 400
DC welding power source for Manual Metal Arc
Eutalloy® 10112
Ni-Cr-B-Si-Fe alloy and tungsten carbide. 60% tungsten carbides.
ProXon® 21023
No deformation or structural change in base metal. Easily machinable deposit
 CastoMatec RCD 600
DC welding power source for Manual Metal Arc
 CastoMatec Xuper 655
Thyristor controlled rectifier
 TeroMatec® 500
TeroMatec cored wire feeder for Open Arc welding
CastoTig® 1611 DC
Exceptionally compact and portable TIG - MMA welding machine
CastoTig® 1702 AC/DC
Digital inverter for TIG welding 
CastoTig® 1711 DC
Compact, lightweight, and portable
CastoTig® 2201 DC
Digital inverter for TIG welding 
CastoTig® 2202 AC/DC
Digital inverter for TIG welding
CastoTig® 3011 DC
Very powerful AC and DC TIG plus Manual Arc capability welding equipment
CastoTig® 3012 AC/DC
Modular power source for TIG and MMA welding
ProXon® 21031
Resists high-temperature corrosion, low coefficient of friction

Stránky