Our Products

Následující vzorky z výhradního sortimentu produktů svařování, pájení a žárových nástřiků společnosti Castolin Eutectic ilustrují výběr řešení v oblasti údržby, oprav, spojování a výroby. Pokud není Vámi požadovaný produkt v níže uvedeném seznamu, kontaktujte nás prosím.  

EnDOTec® DO*04
Gas-shielded metal cored wire develped for producing anti-wear coating depositing steel alloyed with chromium, cobalt and molybdenum. Excellent resistance to wear by metal-to-metal friction, mechanical properties stable up to 500°C.
EnDOTec® DO*06
Gas-shielded metal cored wire developed for producing anti-wear coatings with High Speed Steel properties for fabrication or repair of damaged tools. Increased resistance to shock, pressure, cracking and oxidation at high temperature.
EnDOTec® DO*15
Gas-shielded metal cored wire developed for producing anti-wear coatings on parts subject to impact, abrasion and contact fatigue.
EnDOTec® DO*16
Gas-shielded metal cored wire developed for producing anti-wear coatings having excellent resistance to shocks and to pressures up to 550°C.
EuTroLoy 16012
Alloy Co-Cr-W-Ni-Fe (Gr. 12 Type). Excellent resistance to high-temperature oxidation.
EnDOTec® DO*28 S
Gas-shielded metal-flux cored wire intended for welding AISI 316 L type steel.
EnDOTec® 36
Gas-shielded continuous electrode for joining and anti-corrosion coating of low carbon CrNiMo stainless steels
EnDOTec® DO*53 S
Gas-shielded metal flux cored wire intended for welding hydropower components
EnDOTec® DO*55
Gas-shielded metal cored wire Maraging type for anti-wear coatings for injection moulds aluminium castings
EnDOTec® DO*66 S
Gas-shielded rutile flux cored wire alloyed with nickel developed for welding structural steel
EnDOTec® DO*05
Gas-shielded metal cored wire developed for producing work hardening anti-wear coatings, having an excellent resistance to impacts, pressure and high stress abrasion.
EnDOTec® DO*11
Gas-shielded metal cored wire developed for producing anti-wear coatings (tungsten carbides in a nickel based matrix) in combination with heat and corrosion.
EnDOTec® DO*33
Gas-shielded metal cored wire developed for producing anti-wear coatings having excellent resistance to abrasion and erosion at high temperatures up to 650°C.
EnDOTec® DO*30
Gas-shielded metal cored wire developed for producing single pass, anti-wear coatings on parts subject to abrasion and erosion by small particles.
EnDOTec® DO*13
Gas-shielded metal cored wire developed for producing anti-wear coatings, having a high resistance to pressure, impacts and moderate abrasion.
EuTroLoy 16221
Excellent bonding with lamellar and spheroidal graphite grey cast iron, as well as steel.
EnDOTec® DO*48
Gas-shielded metal cored wire developed for producing anti-wear coatings (tungsten carbides in an iron base matrix) on parts subject to severe abrasion or erosion combined with moderate pressure and impacts.
EnDOTec® DO*23
Gas-shielded metal cored innovative nickel alloy wire developed for welding cast iron assemblies or rebuilding.
EnDOTec® DO*60
Gas-shielded metal cored wire depositing a Grade 6 type cobalt base alloy. Excellent resistance to heat, corrosion, wear, cavitation and metal-to-metal friction.
EnDOTec® DO*70
Gas-shielded metal cored wire depositing a Grade 12 type cobalt base alloy. Excellent resistance to heat, corrosion, abrasion, cavitation and metal-to-metal friction
EnDOTec® DO*80
Gas-shielded metal cored wire depositing a Grade 21 type cobalt base alloy. Excellent resistance to heat, corrosion, wear, cavitation and metal-to-metal friction.
EutecTrode® Castinox D
Electrode developed for assembly and repair of AISI 309 (25/12), 310 (25/20), and 314 type refractory steel. Excellent resistance to heat (up to 1200 °C) and corrosion.
EutecTrode® Chamfertrode 03/04
Special manual electrodes for chamfering, gouging, and removal of old, worn or cracked metal, plus correction of casting defects
EutecTrode® CutTrode 01
Special manual electrode for rapid cutting and piercing of most metals, in all positions
EutecTrode® N102
Manual electrode for anti-wear protective coatings on parts subjected to pressure and impact wear, including grab buckets, dragline buckets, crusher hammers, ripper teeth, drills, chisels and forging tools
RotoTec 19400
No deformation or structural change in base metal. Hard but fully machinable deposit
EutecTrode® N6070
Manual electrode for anti-wear protective coatings on parts such as extruder screws, bulldozer blades, hoppers and chutes, mixers, scrapers and sludge pumps
EutecTrode® N700
Manual electrode for anti-abrasion protective coating of steel parts such as fan blades, turbine components, crushers, excavator buckets, conveyor parts, scrapers, drills and agriculture machinery.
EutecTrode® 6804
High metal recovery electrode developed for protective coatings on parts subject to elevated temperatures in combined wear regimes: heat – corrosion – friction
EutecTrode® N9010
Electrode deposits a cobalt based alloy with highest hardness (Grade 1 type), intended for resurfacing for protection against wear combined with heat, corrosion and abrasion

Stránky