Our Přídavné materiály pro svařování Products

Následující vzorky z výhradního sortimentu produktů svařování, pájení a žárových nástřiků společnosti Castolin Eutectic ilustrují výběr řešení v oblasti údržby, oprav, spojování a výroby. Pokud není Vámi požadovaný produkt v níže uvedeném seznamu, kontaktujte nás prosím.  

EnDOTec® DO*28 S
Gas-shielded metal-flux cored wire intended for welding AISI 316 L type steel.
EnDOTec® 36
Gas-shielded continuous electrode for joining and anti-corrosion coating of low carbon CrNiMo stainless steels
EnDOTec® DO*53 S
Gas-shielded metal flux cored wire intended for welding hydropower components
EnDOTec® DO*55
Gas-shielded metal cored wire Maraging type for anti-wear coatings for injection moulds aluminium castings
EnDOTec® DO*66 S
Gas-shielded rutile flux cored wire alloyed with nickel developed for welding structural steel
EnDOTec® DO*05
Gas-shielded metal cored wire developed for producing work hardening anti-wear coatings, having an excellent resistance to impacts, pressure and high stress abrasion.
EnDOTec® DO*11
Gas-shielded metal cored wire developed for producing anti-wear coatings (tungsten carbides in a nickel based matrix) in combination with heat and corrosion.
EnDOTec® DO*33
Gas-shielded metal cored wire developed for producing anti-wear coatings having excellent resistance to abrasion and erosion at high temperatures up to 650°C.
EnDOTec® DO*30
Gas-shielded metal cored wire developed for producing single pass, anti-wear coatings on parts subject to abrasion and erosion by small particles.
EnDOTec® DO*13
Gas-shielded metal cored wire developed for producing anti-wear coatings, having a high resistance to pressure, impacts and moderate abrasion.
EnDOTec® DO*48
Gas-shielded metal cored wire developed for producing anti-wear coatings (tungsten carbides in an iron base matrix) on parts subject to severe abrasion or erosion combined with moderate pressure and impacts.
EnDOTec® DO*23
Gas-shielded metal cored innovative nickel alloy wire developed for welding cast iron assemblies or rebuilding.
EnDOTec® DO*60
Gas-shielded metal cored wire depositing a Grade 6 type cobalt base alloy. Excellent resistance to heat, corrosion, wear, cavitation and metal-to-metal friction.
EnDOTec® DO*70
Gas-shielded metal cored wire depositing a Grade 12 type cobalt base alloy. Excellent resistance to heat, corrosion, abrasion, cavitation and metal-to-metal friction
EnDOTec® DO*80
Gas-shielded metal cored wire depositing a Grade 21 type cobalt base alloy. Excellent resistance to heat, corrosion, wear, cavitation and metal-to-metal friction.
EutecTrode® Castinox D
Electrode developed for assembly and repair of AISI 309 (25/12), 310 (25/20), and 314 type refractory steel. Excellent resistance to heat (up to 1200 °C) and corrosion.
EutecTrode® Chamfertrode 03/04
Special manual electrodes for chamfering, gouging, and removal of old, worn or cracked metal, plus correction of casting defects
EutecTrode® CutTrode 01
Special manual electrode for rapid cutting and piercing of most metals, in all positions
EutecTrode® N102
Manual electrode for anti-wear protective coatings on parts subjected to pressure and impact wear, including grab buckets, dragline buckets, crusher hammers, ripper teeth, drills, chisels and forging tools
EutecTrode® N6070
Manual electrode for anti-wear protective coatings on parts such as extruder screws, bulldozer blades, hoppers and chutes, mixers, scrapers and sludge pumps
EutecTrode® N700
Manual electrode for anti-abrasion protective coating of steel parts such as fan blades, turbine components, crushers, excavator buckets, conveyor parts, scrapers, drills and agriculture machinery.
EutecTrode® 6804
High metal recovery electrode developed for protective coatings on parts subject to elevated temperatures in combined wear regimes: heat – corrosion – friction
EutecTrode® N9010
Electrode deposits a cobalt based alloy with highest hardness (Grade 1 type), intended for resurfacing for protection against wear combined with heat, corrosion and abrasion
EutecTrode® N9025
Electrode deposits a cobalt based, work hardening alloy (Grade 25 type) having high hot crack resistant mechanical properties and a superior resistance to metal-to-metal friction, oxidation, pressure and thermal fatigue.
EutecTrode® N9060
Electrode deposits a cobalt based alloy with lower hardness (Grade 6 type), intended for resurfacing for protection against wear combined with corrosion, heat and abrasion.
EutecTrode® N9080
Electrode deposits a work hardening cobalt based alloy (Grade 21 type), intended for resurfacing for protection against wear combined with corrosion, heat and impact.
EutecTrode® 2-44
Low-heat-input manual electrode for cold welding of contaminated cast irons
EutecTrode® Xuper 6055
Manual electrode for anti-wear protective coatings on parts such as shear blades, deep drawing and stamping tools and dies in the automobile and mechanical engineering industries.
EutecTrode® 6450
Manual electrode for anti-wear protective coatings and intermediate layers on steel parts such as drive sprockets, conveyor rollers, crusher hammers, railway points and overhead gantry rails.
EutecTrode® 6600
Special manual electrode for machine construction and joining boiler components, bodywork, tanks, containers, vehicle chassis, pipes and tubular assemblies, shipbuilding

Stránky